极速赛车开奖号码记录
PRO-SET High-Temperature Epoxies are a system of high-performance epoxies for synthetic composite mold and part manufacture. The High-Temperature system consists of a Surface Coat Epoxy, Laminating Epoxy, and an Infusion Epoxy. When combined to manufacture composite parts, they can be demolded after 24-48 hours at room temperature before a freestanding post-cure.
The Tg of this system is as high as 300°F (149°C) with proper post-cure. It has excellent temperature stability and part cosmetics.
The Infusion and Laminating Epoxies can be dyed, upon request, to provide for visual quality control. A yellow dye in the resin and a blue dye in the hardener, when properly metered and thoroughly mixed, will result in a consistent shade of green. The Surface Coat Epoxy is available only in black.
High-Temp Infusion Resin
- HTP-180 High-Temp Infusion Resin (elevated cure)
High-Temp Infusion Hardener
- HTP-280 High-Temp Infusion Hardener
High-Temp Laminating Resin
- HTP-182 High-Temp Laminating Resin
High-Temp Laminating Hardener
- HTP-284 High Temp Laminating Fast Hardener
- HTP-286 High Temp Laminating Slow Hardener
High-Temp Surface Coat Resin
- HTP-187 High-Temp Surface Coat Resin
High Temp Surface Coat Hardener
- HTP-288 High-Temp Surface Coat Hardener
See Technical Data Sheets in the table below for details on PRO-SET High-Temp resin and hardener combinations.
Standard High-Temp Epoxies — Technical Data |
||
|---|---|---|
| System | Epoxy Type | Cure Speed |
| HTP-180 / HTP-280 | High-Temp Infusion | Medium |
| HTP-182 / HTP-284 | High-Temp Laminating | Fast |
| HTP-182 / HTP-286 | High-Temp Laminating | Slow |
| HTP-187 / HTP-288 | High-Temp Surface Coat | Slow |
